Sensor Cleaning

FLUIDTRONICS
AUTOMOTIVE TRUCK ROBOTICS AGRICULTURE

Discover the Sensor cleaning

Advanced Driver Assistance systems (ADAS) are increasingly present in modern cars and trucks. These systems are using optical or LIDAR sensors and need to stay clean for good efficiency. We developed an air blower dedicated to blowing an air curtain around a camera lens or any other system that needs to stay clean, to blow away any droplet of water or any dust particle to keep it clean at any time. The air flux can be adapted to the need, depending on the vehicle speed to consume as little power as required to keep the sensor free of pollution. The blower, motor and driver are all combined in a single package to be set as close as possible to the point of use for maximum compactness and efficiency.

Discover the Sensor cleaning

The system can blow an air curtain along the sensor lens to protect a camera lens or any other sensor from splashes and blow away any existing droplets.
Thanks to its compactness, the system can be integrated as close to the application as possible for a more efficient cleaning.

Discover more about Sensor cleaning

ADAS performance depends on the quality of sensor data.
Our integrated air blower continuously protects cameras and optical sensors from contamination.
Compact, efficient, and adaptable to vehicle operating conditions.

YOUR QUESTIONS, OUR EXPERTISE

Frequently asked questions

At what speed has MMT illustrated camera-lens protection?

MMT’s illustrated application protects a rear-view-mirror camera lens from water splashes at vehicle speeds up to 150 km/h. Cleaning performance depends on the sensor geometry and installation, so each configuration is evaluated against its intended operating conditions.

Can the cleaning airflow adapt to vehicle speed?

Yes. MMT’s concept adjusts airflow to operating needs, including vehicle speed. Stronger airflow can be used when exposure to splashes increases, while lower demand allows reduced blower power consumption.

Why place the blower close to the sensor?

Locating the blower near the point of use helps deliver airflow where it is needed. MMT combines the blower, motor and electronic driver in one compact package to support decentralized integration near the camera or sensor.

Which vehicle sensors can benefit from an air curtain?

The technology targets camera lenses and other optical sensing surfaces used in driver-assistance systems, including relevant LIDAR installations. Its suitability depends on the sensor geometry, contamination conditions, airflow path and available installation space.

How does MMT’s air-based sensor-cleaning technology work?

MMT’s concept uses a compact electric blower to create an air curtain around a camera lens or optical sensor. The airflow helps protect the surface from splashes and remove droplets or particles that could obstruct sensing.